3 Phase Synchronous Motor Speed Control System Using PID Control

Authors

  • Yun Tonce Kusuma Priyanto Institut Teknologi Kalimantan
  • Amalia Rizqi Utami Institut Teknologi Kalimantan
  • Muhammad Ridho Dewanto Institut Teknologi Kalimantan
  • Dwi Surya Santaki Institut Teknologi Kalimantan
  • Dian Wulandari Institut Teknologi Kalimantan

DOI:

https://doi.org/10.37034/jsisfotek.v4i4.149

Keywords:

Synchronous, Motor, Rotation Speed, Control, Proportional Integral Differential (PID)

Abstract

Synchronous motor is an alternating current (AC) motor that operates with the prime mover as the initial rotation of the rotor until the rotational speed is equal to the rotational speed of the imaginary poles on the stator. In its application a 3-phase synchronous motor needs to be set in advance so that the resulting speed is stable. In this big task of Electric Motor Control, a speed experiment was carried out on a 3-phase synchronous motor using Mathlab simulation with Siemens motor specifications, namely 50 Hz, 400 V with 16kVA power and 1500 RPM rotational speed using PID control to control the speed of a 3-phase synchronous motor so that it is more stable. From the calculations that have been carried out and the PID tuning that has been carried out, the results show that the PID control can control the motor so as to produce a more stable and efficient speed in the industry

References

Anefi, S.R., 2014. “Phase Compensation Motor Sinkron”. Semarang: Politeknik Negeri Semarang.

Nugroho, Y.A., 2014. “Motor Sinkron 3 Fasa Sederhana Dengan 2 Kutub Rotor Berbasis Digital.” (Doctoral dissertation, Prodi Teknik Elektro Unika Soegijapranata).

Pattiapon, D.R., Rikumahu, J.J. and Jamlaay, M., 2019. “PENGGUNAAN MOTOR SINKRON TIGA PHASA TIPE SALIENT POLE SEBAGAI GENERATOR SINKRON.” Jurnal Simetrik, 9(2), pp.197-207.

Siagian, P., 2011. “Simulasi Matlab untuk Perancangan PID Controler.” Jurnal Processor, 6(1).

Setiawan, I.B., 2017. ‘Analisis Pengaruh Pengaturan Arus Eksitasi Motor Sinkron Tiga Fasa Teradap Perbaikan Faktor Daya Pada Sistem’. Skripsi. Medan: Universitas Sumatera Utara.

Sunarlik, W., 2011. “Prinsip Kerja Generator Sinkron.” Jurnal November.

Downloads

Published

13-10-2022

How to Cite

[1]
Y. T. K. Priyanto, A. R. . Utami, M. R. . . Dewanto, D. S. . Santaki, and D. Wulandari, “3 Phase Synchronous Motor Speed Control System Using PID Control”, jsisfotek, vol. 4, no. 4, pp. 180–185, Oct. 2022.

Issue

2022, Vol. 4, No. 4

Section

Articles

License

Copyright (c) 2022 Jurnal Sistim Informasi dan Teknologi

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)