The Application of Six Sigma Framework (Define-Measure-Analyse-Improve-Control) to Improve Product Quality in Water Dispenser Manufacturing Company

Authors

  • Hendy Tannady Universitas Multimedia Nusantara
  • Fauzan Jiddan Universitas Multimedia Nusantara

DOI:

https://doi.org/10.60083/jsisfotek.v6i1.339

Keywords:

Six Sigma, DMAIC, FMEA, Sipoc Diagram, fishbone

Abstract

This research aims to determine the causes of water dispenser product defects and find the main factors causing defects. This research was conducted in the form of a case study. The data used consists of quantitative data, supported by qualitative data. The analytical method used is Six Sigma, with a focus on the DMAIC method (define, measure, analyze, improve, and control) and sigma values. The population of this research is all water dispenser product equipment. Through observation, interviews and documentation techniques, this research collected data. The data processing method used is DMAIC Six Sigma, with a special focus on the Measure stage. Based on the research results, it was found that the process performance of the water dispenser product was at the level of 4.72 sigma with a DPMO value of 633,732. The most dominant defect occurs in the motor pump. Causes of defects in water dispenser products include human factors (inexperienced operators, errors in reading work instructions, unclear job holders, products not completed on time), materials (parts that do not meet standards, inspection/test equipment that does not function, CBU units that do not conform to standards), methods (products do not meet customer expectations, finished products do not meet standards, inspector operators do not master the use of measuring equipment according to regulations, customer complaints are not handled properly), and environment (hot room conditions, unstable room temperature). The most influential cause and priority for improvement is that customer complaints are not resolved or solutions are sought by the supplier.

References

Ahmad, F, “Six Sigma DMAIC as a Quality Control Method for Chair Products in MSEs,” JISI: Jurnal Integrasi Sistem Industri, vol. 6, no. 1, pp. 11-17, 2019, doi:https://dx.doi.org/10.24853/jisi.6.1.11-17

K Pramudito, D., Yani, I., Utami, E. Y., Nuraini, R., & Kushariyadi. (2024). Analysis Of The Influence Of Digital Service Quality and Online Promotions on Customers Intention To Use Digital Wallet Application Gopay. Jurnal Sistim Informasi Dan Teknologi, 5(4), 44–50. https://doi.org/10.60083/jsisfotek.v5i4.326

Tannady, H., Dwi Susmantoro, T., & Hendra, T. (2023). The Application of Exponential Comparison Method and Analytical Hierarchy Process to Analyze Supply Chain Performance. Jurnal Sistim Informasi Dan Teknologi, 5(1), 58–62. https://doi.org/10.37034/jsisfotek.v5i1.201

Lusiani, M., Yuirafat, A., & Tannady, H. (2017, July). Analisis Kepuasan Pengguna BPJS dan NON BPJS terhadap layanan rumah sakit dengan model Quality Function Deployment. Seminar Nasional Akuntansi dan Bisnis (SNAB), Fakultas Ekonomi Universitas Widyatama.

Arifin, M. S. ., Fikri Maulana, M. ., Suroso, A., Suhartono, & Mariam. (2023). The Role of E-Customer Satisfaction as Intervening Variable in Relationship Between E-Service Quality, E-Recovery and E-Customer Loyalty of Indonesian Railroad Access Customers. Jurnal Sistim Informasi Dan Teknologi, 5(3), 6–10. https://doi.org/10.60083/jsisfotek.v5i3.274

Ningsih, S., Firdausijah, R. T., & Alamsyah, K. (2023). DIGITAL-BASED HR DEVELOPMENT STRATEGY IN IMPROVING EMPLOYEE PERFORMANCE AT THE TELECOMMUNICATIONS EQUIPMENT TESTING CENTER. Vegueta. Anuario de la Facultad de Geografía e Historia, 23(1), 89-103.

Prabandani, D., Herlyana, A., & Pramayu, A. P. (2024). The major impact of coal mining service activities to GHG emissions: Case study at PT Bukit Makmur Mandiri Utama (BUMA) jobsite Binsua and Lati. In E3S Web of Conferences (Vol. 485, p. 06007). EDP Sciences.

Rahmawati, H. N., Pramayu, A. P., Tantia, A. A., & Putra, A. P. (2023, October). The Influence of Safety Culture Maturity Level with Site Safety Performance. In Proceeding Book of The International Conference on Manpower and Sustainable Development: Transformation of Manpower in the Changing World of Work (Vol. 1).

Andika, A., Jennifer, J., Huang, J. C., & Sebastian, J. C. (2021). Analysis of Digital Marketing Adoption in Indonesian Micro, Small, and Medium Enterprises. Jurnal Manajemen Bisnis, 18(3), 308-328.

Ulza, E., Semenovna, S. T., Wijiharjono, N., Zulpahmi, Z., & Zamzany, F. R. (2017). Synchromarketing strategies and Ansoff matrix in increasing the company‟ s revenue. C Man Behav Studies, 1(1), 305-315.

Muchdie, M., Ulza, E., & Setiawan, E. (2018). Sector and Country Balance of Trade Analysis Based on World Input-Output Database: Indonesian Economy. Ekuilibrium: Jurnal Ilmiah Bidang Ilmu Ekonomi, 13(2), 109-129.

Tannady, H., Dewi, C. S., & Gilbert. (2024). Exploring Role of Technology Performance Expectancy, Application Effort Expectancy, Perceived Risk and Perceived Cost On Digital Behavioral Intention of GoFood Users. Jurnal Informasi Dan Teknologi, 6(1), 80-85. https://doi.org/10.60083/jidt.v6i1.477

Al-Faritsy, A. Z., & Wahyunoto, A. S, “Analysis of Table Product Quality Control Using the Six Sigma Method at PT XYZ,” Jurnal Rekayasa Industri (JRI), vol. 4, no. 2, pp. 52-62, 2022.

Tannady, H., & Purwanto, E. (2021, February). Quality control of frame production using DMAIC method in plastic PP corrugated box manufacturer. In Journal of Physics: Conference Series (Vol. 1783, No. 1, p. 012078). IOP Publishing.

Koesdijati, T., & Nurcahyanie, Y. D, “Approach of six Sigma Method to Control the Quality of Wetmix Products in The Cream Making Process,” Journal of applied Industrial Engineering - University of PGRI Adi Buana, pp. 50-57, 2019.

Tannady, H., Aryanti, M. N., Julieta, L., Salsabila, H. D., & Octavia, D. (2023). Analysis of Service Quality on Customer Satisfaction at Merchant Mixue Summarecon Digital Center Branch, Tangerang. Open Access Indonesia Journal of Social Sciences, 6(1), 912-916.

Prawirosentono, S, “Human Resources Management: Employee Performance Policy: Tips for Building a Competitive Organization in the Era of World Free Trade,” Jakarta: Rajawali Press, 2014.

Singgih, M. L., & Renanda, “Improving Paper Product Quality Using the Six Sigma Approach at Y Paper Factory,” Jurnal Tekno, 2008.

Pono, M., Reni, A., Osman, I., & Harisa, R. (2019, August). Performance enhancement strategy through business environment, product innovation and competitive advantages. In 3rd International Conference on Accounting, Management and Economics 2018 (ICAME 2018) (pp. 258-262). Atlantis Press.

Pratiwi, A. (2022). Pengaruh Keintiman Pelanggan (Customer Intimacy) Terhadap Loyalitas Pelanggan Produk Kosmetik Wardah Pada Mahasiswa Fakultas Ekonomi dan Bisnis Universitas Hasanuddin (Doctoral dissertation, Universitas Hasanuddin).

Osman, I., Parawansa, D. A., & Maming, J. (2019, August). Performance Improvement through Interpersonal Communication and Job Satisfaction (Empirical Study of Nurses in Puskesmas/Community Health Center) in Makassar, Indonesia. In 3rd International Conference on Accounting, Management and Economics 2018 (ICAME 2018) (pp. 601-607). Atlantis Press.

Judijanto, L., Asniar, N., Kushariyadi, K., Utami, E. Y., & Telaumbanua, E. (2024). Application of Integrated Logistics Networks in Improving the Efficiency of Distribution and Delivery of Goods in Indonesia a Literature Review. Sciences du Nord Economics and Business, 1(01), 01-10.

Kushariyadi, K., & Sugito, B. (2022). Optimasi Distribusi Transportasi Bahan Bakar Minyak (BBM) Jenis Bio Solar di Wilayah Jawa Tengah. NUSANTARA: Jurnal Ilmu Pengetahuan Sosial, 9(2), 162-169.

Nasution, M. A., Tawil, M. R., Kushariyadi, K., Gumerung, J. W. L., & Lumentah, L. (2024). The Influence of Green Marketing Strategy on Purchasing Decisions with Emotional Desire as a Moderating Variable. International Journal of Economic Literature, 2(2), 386-394.

Kanyoma, I. R., Venriza, O., & Kushariyadi, K. (2023). Optimalisasi Penambahan Odorant pada Gas Mengunakan Metode Time Series di PT. XYZ. Lembaran publikasi minyak dan gas bumi, 57(2), 43-53.

Tannady, H., Lestari, R., Renwarin, J. M., Nurjanah, S., & Destari, D. (2023, July). Service quality analysis on packaging terminal services at Tanjung Priok Port. In AIP Conference Proceedings (Vol. 2798, No. 1). AIP Publishing.

Yuliatin, I., & Heryanto, A. Y, “Quality Control Analysis of Refined Iodized Salt Products Using the Lean Six Sigma Method,” Teknotan, vol. 17, no. 1, pp. 11-20, 2023, doi:10.24198/jt.vol17n1.2

Downloads

Published

29-02-2024

How to Cite

Tannady, H., & Jiddan, F. (2024). The Application of Six Sigma Framework (Define-Measure-Analyse-Improve-Control) to Improve Product Quality in Water Dispenser Manufacturing Company. Jurnal Sistim Informasi Dan Teknologi, 6(1), 7–12. https://doi.org/10.60083/jsisfotek.v6i1.339

Issue

Section

Articles